***************************************************************************************************************************************************
UNIVERSAL TESTING MACHINE
DIGITAL CUM COMPUTERIZED MODEL
FEATURES OF ELECTRONIC CONTROL PANEL
Measuring system consists of microprocessor panel with serial interface software. In fully computerized system, you are dependent on the type of computer used. Our instrument is digital cum computerized model which can be used independently digital instrument as well as computerized instrument.
HIGHLIGHTS:
- System is independent of the type of computer used for communication.
- On line display of Load/Displacement/extension/Strain rate/Load rate
- On line Real time graph of load vs. displacement and stress vs. strain
- Output of 4 graphs for single test run viz. Load vs. Disp., Stress vs. Strain, Load vs. extension with curve tracing/zooming facility.
- Wide range of output (test results) selection
- Unit changing facility for different units like N, kN, Kg, T, Mpa
- Test can be carried out with the help of control panel independently without PC. Still you will get all the results on any printer connected to computer.
- Print out format as per customer requirement (You have to give details in advance)
TECHNICAL DATA
MODEL |
ATE/UTM/100C |
Max capacity |
1000kN |
Minimum graduation |
0.1 kN |
Straining/ piston speeds (mm/mm) (at no load) |
0-150 |
Resolution of piston movement (mm) |
0.1 |
Clearance for tensile at fully descended working piston (mm) |
50-700 |
Clearance for compression test at fully descended working piston (mm) Clearance between columns (mm) |
0-700, 500 |
Ram stroke (mm) |
200 |
CONNECTED LOAD |
|
HP |
5 |
V |
400-440 |
PHASE |
3 |
DIMENSIONS |
|
LXWXH in (Inch) |
72 x 30 x 90 (approx.) |
Net Weight in (kg) |
2200 (approx.) |
Gross Weight in (kg) |
2600 (approx.) |
STANDARD ACCESSORIES |
|
For Tension Test |
|
Clamping jaws for round specimen diameter (mm) |
10-25, 25-40 & 40-55 |
Clamping jaws for flat specimens thickness (mm) Width |
0-15 |
For Compression Test |
|
Pair of compression plates of diameter (mm) |
120 |
For Flexural Test |
|
Table with adjustable rollers, width of rollers (mm) |
160 |
Diameter of the rollers (mm) |
50 |
Max. clearance between supports |
600 |
Radius of punch tops (mm) |
16,22 |